No worries, have a look at a few of our frequently asked questions for more help.
How do I setup my incubator?
These incubators are very user friendly and you simply need to unpack the contents inside and plug in the incubator. Please remember to let your Incubator run for 24 hours with no water and no eggs to allow it time to regulate.
What settings should I have it on?
The temperature and humidity ranges that it needs to be set on depends on the actual temperature and humidity in your area. It also depends on the type of eggs being incubated.
We recommend to check with the egg supplier on what the eggs require for both temperature and humidity and set accordingly. Initially when setting up incubator both temp and humidity ranges are set at the default ranges.
Temp: 37.8 to 37.5. Humidity: 80% to 60%.
The turning tray isn't working?
The default position for the egg turning period is at 120 minutes. So it will only turn every 2 hours.
You can test the turning function is working by Short Press the 'RST' button (or the “+” button on the smaller incubators)
The incubator won't stop beeping?
Don't panic! This beeping is just the machines alarms to notify you once the temp or humidity passes the maximum and minimum readings.
You can manually change these settings by:
Long Press the 'SET' and '+' buttons together until the screen is flashing remove your
fingers.
To move from P1 to H2, short press the set button to change the following:
o P1 sets the temperature at which the alarm will turn 'ON' if it goes over it (default is 38.6 Celsius)
o P4 sets the temperature at which the alarm will turn ON if it goes below it (default 37 Celsius)
• Temperature High Low settings
o P2setsthetemperatureatwhichthemainheaterwillturnOFF(default 37.8)
o P3setsthetemperatureforthemainheatertogoON(default is 37.5)
o H1 sets the humidity at which the alarm will turn ON if it goes over (default is 80%)
o H2 sets the humidity at which the alarm will go ON if it goes under (default is 40%)